###########################################
Connectivity Card NRF52840 M.2
###########################################

.. image:: ../../images/8cc.png
   :alt: Connectivity Cards
   :width: 100%

Datasheet. Release 1.6

Overview
===========

Remote monitoring of critical infrastructure with edge computing
----------------------------------------------------------------

The nRF52 Connectivity Cards from CTHINGS.CO® are extension cards based on the Nordic® Semiconductor nRF52840 SoC. They are multi-protocol chips designed to empower IoT integrators to implement Bluetooth® 5.3 including Bluetooth Low Energy, Bluetooth Mesh, Wirepas®, Thread®, Zigbee®, IEEE 802.15.4, ANT, and other 2.4 GHz protocol stacks.

The extension card allows for full-fledged utilisation of the on-board 32-bit ARM® Cortex™-M4 CPU with FPU. In addition, the ARM TrustZone® CryptoCell cryptographic unit brings an extensive range of cryptography options.

The product comes with full CE class-B and RED certification and can be used to quickly and reliably add 2.4 GHz protocol stack support to any existing device with M.2 Key-E slot (key A+E version also available on request) without worrying about certification or radio performance. A full J-Trace connector is available on a programming jig for convenient firmware development.

CTHINGS.CO also provides various pre-flashing options, including support for DFU bootloader for in-system programming of Zephyr® RTOS applications, and tested support for Wirepas Mesh 2.4 GHz profile.


Specifications
==============

.. list-table::
   :widths: 28 72
   :align: left

   * - **Hardware Features**
     -
       * M.2 Key-E connector pinout compliant, with Key A+E compatibility
       * Single-ended U.FL antenna connector
       * Based on Nordic® Semiconductor nRF52840
       * Ultra-low power consumption
       * RF output power up to +8 dBm
       * Arm® Cortex®-M4 32-bit processor with FPU, 64 MHz
       * USB 2.0 Full-Speed controller, up to 12 Mbps
       * Compatible with the CTHINGS.CO Programming Jig

   * - **Software Features**
     -
       * Compatible with Nordic Semiconductor nRF Connect SDK
       * DFU bootloader support for in-system programming of Zephyr RTOS
       * Compatible with Wirepas Mesh 2.4 GHz profile firmware, including sink functionality

   * - **Electrical Specification**
     -
       * 3.3 V nominal supply voltage, electrically M.2 compliant
       * 3.0 V to 5.0 V supply voltage range
       * ESD protected
       * Ultra-low power consumption

   * - **RF Interface**
     -
       * 2360 MHz to 2500 MHz operating frequency
       * 1 MHz PLL channel spacing
       * ±170 kHz frequency deviation at 1 Mbps
       * ±320 kHz frequency deviation at 2 Mbps
       * 125 kbps to 2000 kbps over-the-air data rate

   * - **Embedded Security**
     -
       * Arm® CryptoCell 310 security subsystem
       * Secure boot ready
       * Secure erase

   * - **Certifications**
     -
       The CTHINGS.CO® nRF52 M.2 Connectivity Card is CE Class B,
       Radio Equipment Directive (RED) and EU RoHS Directive compliant.
       US FCC and UKCA certification is planned.

       The device has been tested to meet the following electromagnetic
       compatibility standards:

       **Electromagnetic emissions:**

       * Conducted emissions: EN 55022, EN 55014-1 and EN 55011
       * Radiated emissions up to 6 GHz
       * Harmonic current emissions: EN 61000-3-2
       * Voltage fluctuations and flicker: EN 61000-3-3

       **Immunity to electromagnetic interference (EMI):**

       * Electrostatic discharge immunity: EN 61000-4-2
       * Radiated electromagnetic field immunity: EN 61000-4-3

   * - **Use Cases**
     -
       * Edge IoT gateways
       * Workstations and laptops
       * Cellular backhaul systems for non-cellular 2.4 GHz mesh networks
       * Bluetooth interface for IoT sensors
       * Gateways for Nordic® Semiconductor nRF52-based IoT systems

Capabilities
============

.. list-table::
   :widths: 30 70
   :align: left

   * - **Wirepas Mesh**
     - Plug-and-play support for Wirepas 2.4 GHz profile mesh networks.

   * - **M.2 Pinout Compliance**
     - Small and standardized form factor compliant with common hardware.

   * - **Multiprotocol**
     -
       * Compatible with the nRF Connect SDK
       * Bluetooth Low Energy
       * Bluetooth Mesh
       * Thread
       * Zigbee
       * ANT
       * Wirepas Mesh

   * - **High-Performance CPU**
     - 32-bit Arm® Cortex®-M4 processor with a floating-point unit.

   * - **Bluetooth® 5.3**
     - Plug-and-play support for Bluetooth® 5.3 and 2.4 GHz wireless communication.

   * - **In-System Firmware Upgrades**
     - Supports in-system programming with an optional factory-provided DFU bootloader for Zephyr RTOS applications.

   * - **Zephyr Support**
     - Out-of-the-box support for Zephyr RTOS.

   * - **Certified Radio Equipment**
     - Full CE Class B and Radio Equipment Directive (RED) certification.


.. card::

   .. grid:: 2
      :gutter: 3
      :margin: 0

      .. grid-item::
         :columns: 8

         **Start your digital transformation journey**

      .. grid-item::
         :columns: 4

         .. button-link:: https://cthings.co/products/connectivity-cards#ordernow
            :color: primary
            :expand:

            Order now